Gangavaram Port · INGGV

Hold Cleaning Riding Crew at Gangavaram Port

Holds cleaned on passage, no port time spent

Get a quote

Tell us the vessel, the port and the window. Scoped reply, usually the same working day.

Cleanship Marine embarks riding crews at Gangavaram Port, Andhra Pradesh, to clean cargo holds on the passage out. The gang joins here, works the holds at sea and disembarks at a nominated port — the cleaning costs the vessel no port time at all.

Every other way of cleaning holds competes with something — the discharge, the berth window, the crew's own work. A riding crew competes with nothing: the work happens on a passage the vessel was making anyway. That is why it is the standard answer for tonnage leaving Gangavaram on a ballast leg with a clean-cargo fixture waiting at the other end, and why it is the only method whose cost does not rise when the port gets busy.

What it gets you

Zero port time spent on hold cleaning — the work happens on a passage already being made
Holds ready for inspection on arrival rather than starting the job there
Ship's crew kept on watchkeeping and maintenance instead of cleaning
One team and one standard across a multi-port voyage

Working conditions at Gangavaram

Work here starts alongside, and where the berth window runs out it continues on the outward passage with a riding crew — the berth will not be held open for it. The north-east monsoon sets the outer limits of the calendar, roughly October to December, and it affects the anchorage far more than the berth. Access approval runs through Gangavaram Port Limited and the terminal, and the disposal route for residues and washings is fixed before the gang boards rather than found afterwards.

Where we work: Deep-draft bulk berths · Outer anchorage
Vessels we see here: Capesize and Panamax bulk carriers · General cargo ships

What we do at Gangavaram

Crew embarked at Gangavaram with tools, chemicals and PPE, cleared through the agent and the port
Full hold cleaning programme worked at sea, hold by hold, to the standard the next fixture requires
Bilge wells, strum boxes and hold bilge lines cleaned and tested on passage
Enclosed-space entry procedures, gas testing and safety supervision run to the vessel's own permit system
Disembarkation at the nominated port arranged with visas, tickets and clearances handled
Daily progress reporting to the vessel and the office, with a completion record on landing

Planning the window at Gangavaram

The north-east monsoon governs the calendar at Gangavaram Port, roughly October to December. The Bay of Bengal also carries cyclone risk in April to June and again from October to December, so an anchorage attendance on this coast is planned with a standby allowance rather than a single fixed date. Turnaround here is quick and the berth will not be held open for cleaning, so the work is either sequenced hold by hold behind the discharge as each one empties, or handed to a riding crew to complete on the passage out. Waiting for all holds to be empty is waiting past the berth window.

Teams mobilise via Visakhapatnam (VTZ), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.

What we typically find at Gangavaram

Gangavaram loads and discharges bauxite, limestone and ore alongside coal, and bauxite is the one that surprises owners: it is fine, red and it stains, so it needs chemical treatment and rinsing rather than sweeping. Capesize hold areas make this a job to plan in days, not shifts.

Gangavaram Port runs thermal and coking coal, iron ore, bauxite through the same holds, and that sequence is where the money is lost: mineral fines and dust from one fixture will fail an inspection for the next if the holds are only swept. The standard that matters is the one the next cargo demands, not the one the last one left.

Standard scope of work

Included as standard on every riding crew hold cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.

Passage planning of the cleaning programme: The cleaning sequence is planned against the passage length, expected weather and ballast condition so every hold is completed with drying time in hand.
Complete hold preparation: Sweeping, washing, chemical treatment, rinsing and drying of all cargo holds to the agreed standard, exactly as delivered by a shore gang.
Hatch cover and coaming work: Cleaning of compression bars, drain channels and gaskets, with defects reported to the chief officer for rectification before loading.
Bilge and drainage systems: Bilge wells emptied and cleaned, strainers cleared and non-return valves tested so holds pass the water-ingress checks at inspection.
Additional deck work: Where the passage allows, the crew can extend to deck chipping, spot priming and painting under the same mobilisation.

Full Hold Cleaning Riding Crew service details

How we deliver it at Gangavaram

1
Scope and vessel details
Tell us the vessel, her particulars, the last and next cargo and the window at Gangavaram. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
2
Approvals and waste routing
Access and working approval is arranged with Gangavaram Port Limited and the terminal, and the disposal route for residues and washings is fixed before the gang boards — MARPOL Annex V compliance is a documented chain at Gangavaram, not an assurance. Where reception is limited, the plan changes rather than the paperwork.
3
Mobilisation to Gangavaram
Gangs, pumps, chemicals and equipment mobilise via Visakhapatnam (VTZ). Where a vessel is also calling at Visakhapatnam, one mobilisation is normally sized to cover both.
4
Entry, sequencing and the work
Enclosed-space entry runs to the vessel's own permit system, with a fresh gas test before every entry and after every break. Gas testing, standby cover and continuous supervision run throughout, and progress is reported hold by hold rather than only at the end.
5
Report and handover
A completion report covering riding crew hold cleaning is issued with before-and-after imagery, hold by hold and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.

Gangavaram Port at a glance

UN/LOCODE: INGGV
Port type: Private Port
State: Andhra Pradesh
Country: India
Water body: Bay of Bengal
Port authority: Gangavaram Port Limited
Main cargoes: Thermal and coking coal, Iron ore, Bauxite, Limestone, Fertiliser, Steel
Crew mobilisation: Visakhapatnam (VTZ)
Services here: Hull Cleaning and Hold Cleaning

Frequently asked — Hold Cleaning Riding Crew at Gangavaram

Do you provide riding crew hold cleaning at Gangavaram Port?

Yes. Cleanship Marine works Gangavaram Port (INGGV) in Andhra Pradesh, India, covering the deep-draft bulk berths and outer anchorage. Teams mobilise via Visakhapatnam (VTZ) with the full spread.

Can riding crew hold cleaning be done while the vessel works cargo at Gangavaram?

Partly. Holds are worked one at a time behind the discharge as each empties, but the berth will not be held for the remainder — so the realistic plan is to start alongside and finish with a riding crew on the passage out. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Gangavaram and tell you honestly whether the window you have is enough.

How are hold washings and cargo residues disposed of at Gangavaram?

To MARPOL Annex V, through the reception route agreed with Gangavaram Port Limited and the terminal before the gang boards. Residues, sweepings and washing water are tracked from the hold to reception with documentation, so the vessel has a record rather than an assurance. Where reception capacity at Gangavaram is limited, we change the plan rather than the paperwork.

Where is the work done at Gangavaram — alongside, at anchorage or on passage?

Work here starts alongside, and where the berth window runs out it continues on the outward passage with a riding crew — the berth will not be held open for it.

Which vessels do you carry out riding crew hold cleaning on at Gangavaram?

Capesize and Panamax bulk carriers, General cargo ships — the traffic at Gangavaram Port runs to thermal and coking coal, iron ore, bauxite, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.

How quickly can a team mobilise to Gangavaram?

Crews and equipment mobilise via Visakhapatnam (VTZ). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Visakhapatnam or Kakinada, one mobilisation is often sized to cover both.

What does riding crew hold cleaning at Gangavaram cost?

It depends on the number of holds, the residue from the last cargo, the standard the next fixture demands and how much time the call at Gangavaram actually gives. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Gangavaram and you get a scoped price, usually the same working day.

Get in touch