Kandla Port · INIXY

Rope Access Hold Cleaning at Kandla Port

The upper hold reached without staging

Get a quote

Tell us the vessel, the port and the window. Scoped reply, usually the same working day.

Cleanship Marine provides IRATA rope access teams at Kandla Port, Gujarat, to clean, inspect and treat the upper areas of cargo holds — hatch coamings, upper frames, transverse bulkheads and the underside of hatch covers — without staging or cherry pickers.

The top third of a cargo hold is where staging costs, schedule and risk all concentrate, and it is the part a deck-level gang cannot reach properly. Rope access removes the scaffolding from the equation entirely. At Kandla it also fits the schedule: the upper hold can be worked from ropes while the lower hold is still discharging, so the two do not queue behind each other.

What it gets you

Upper hold areas actually reached and cleaned, not just the parts a gang can stand on
No staging cost, no cherry picker and no lost days erecting and striking it
Structural condition at height inspected while the technicians are already there
Fewer people working at height, under a written plan with a rescue capability

Working conditions at Kandla

Work here runs both alongside and at anchorage depending on the call, and on the passage out where neither gives enough time. The south-west monsoon sets the outer limits of the calendar, roughly June to September, and it affects the anchorage far more than the berth. Access approval runs through Deendayal Port Authority and the terminal, and the disposal route for residues and washings is fixed before the gang boards rather than found afterwards.

Where we work: Kandla creek berths · Oil jetties · Outer anchorage
Vessels we see here: Product and chemical tankers · Bulk carriers · General cargo ships

What we do at Kandla

IRATA-certified technicians working to a written rope access plan with a rescue plan in place
Hatch coamings, upper frames, transverse bulkheads and hatch cover undersides cleaned
Spot blasting, rust removal and touch-up coating at height where the scope calls for it
Close visual inspection of upper structure, reported with photographs at position
Work planned around the discharge sequence and the working rules in force at Kandla
Completion report with before-and-after imagery by hold and by area

Planning the window at Kandla

The south-west monsoon governs the calendar at Kandla Port, roughly June to September. Swell and reduced surface visibility close most open-water work on this coast for the duration, and the weeks either side are unreliable rather than unusable. Some vessels sit and some turn straight round, so the plan is agreed against the actual call rather than a standard package: a shore gang alongside where there is time, a riding crew on the outward passage where there is not.

Cleanship holds an operating base at Kandla, so we can hold a team ready against a shifting ETA rather than committing travel to a date that may move.

What we typically find at Kandla

Kandla runs grain, fertiliser and salt through the same berths, and fertiliser residues are the difficult ones: hygroscopic, corrosive to coatings and unforgiving if a grain cargo follows. Grain-clean standards here are worked to a surveyor attendance, so the cleaning plan is built backwards from the inspection, not forwards from the discharge.

Agricultural and fertiliser parcels dominate here, and they are the unforgiving residues: hygroscopic, corrosive to coatings if left damp, and an outright inspection failure ahead of a food-grade cargo. Holds shut up wet at Kandla are holds that need doing twice.

Standard scope of work

Included as standard on every rope access hold cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.

Upper frame and bulkhead cleaning: Washing and residue removal on upper side frames, brackets, stiffeners and transverse bulkheads that deck-level equipment cannot reach.
Hold overhead and hatch underside: Cleaning of the hold overhead, hatch cover undersides and coaming internals, where cargo dust and previous-cargo residue routinely accumulate.
Close-up visual inspection: Structural condition, coating breakdown and corrosion recorded at height with photographs, giving you inspection-quality data as a by-product of the clean.
Spot preparation and coating: Localised descaling, surface preparation and touch-up coating applied at height, so identified breakdown is treated in the same mobilisation.
Rigging, rescue and supervision: Every work site is rigged with independent working and backup lines under a Level 3 supervisor, with a documented rescue plan in place before the first descent.

Full Hold Cleaning Rope Access service details

How we deliver it at Kandla

1
Scope and vessel details
Tell us the vessel, her particulars, the last and next cargo and the window at Kandla. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
2
Approvals and waste routing
Access and working approval is arranged with Deendayal Port Authority and the terminal, and the disposal route for residues and washings is fixed before the gang boards — MARPOL Annex V compliance is a documented chain at Kandla, not an assurance. Where reception is limited, the plan changes rather than the paperwork.
3
Mobilisation to Kandla
Cleanship holds an operating base at Kandla, so gangs, pumps, chemicals and equipment are on the ground rather than in transit. That is the difference between meeting a window and missing it.
4
Entry, sequencing and the work
Enclosed-space entry runs to the vessel's own permit system, with a fresh gas test before every entry and after every break. Gas testing, standby cover and continuous supervision run throughout, and progress is reported hold by hold rather than only at the end.
5
Report and handover
A completion report covering rope access hold cleaning is issued with before-and-after imagery, hold by hold and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.

Kandla Port at a glance

UN/LOCODE: INIXY
Port type: Major Port
State: Gujarat
Country: India
Water body: Gulf of Kutch
Port authority: Deendayal Port Authority
Main cargoes: POL and edible oils, Fertiliser and raw materials, Grain, Salt, Timber, Containers
Crew mobilisation: Kandla (IXY) / Bhuj (BHJ)
Services here: Hull Cleaning, Hold Cleaning and Tank Cleaning

Frequently asked — Rope Access Hold Cleaning at Kandla

Do you provide rope access hold cleaning at Kandla Port?

Yes. Cleanship Marine works Kandla Port (INIXY) in Gujarat, India, covering the Kandla creek berths, oil jetties and outer anchorage. We hold an operating base at Kandla, so people and equipment are held locally rather than mobilised against a window.

Can rope access hold cleaning be done while the vessel works cargo at Kandla?

It depends on the call. Where the vessel has time, a shore gang works the holds alongside as they empty; where she turns straight round, a riding crew completes them on the passage. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Kandla and tell you honestly whether the window you have is enough.

How are hold washings and cargo residues disposed of at Kandla?

To MARPOL Annex V, through the reception route agreed with Deendayal Port Authority and the terminal before the gang boards. Residues, sweepings and washing water are tracked from the hold to reception with documentation, so the vessel has a record rather than an assurance. Where reception capacity at Kandla is limited, we change the plan rather than the paperwork.

Where is the work done at Kandla — alongside, at anchorage or on passage?

Work here runs both alongside and at anchorage depending on the call, and on the passage out where neither gives enough time.

Which vessels do you carry out rope access hold cleaning on at Kandla?

Product and chemical tankers, Bulk carriers, General cargo ships — the traffic at Kandla Port runs to pol and edible oils, fertiliser and raw materials, grain, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.

How quickly can a team mobilise to Kandla?

Cleanship keeps an operating base at Kandla, so response here is fast — the constraint is normally the approvals and the working window rather than getting crews and equipment to the port.

What does rope access hold cleaning at Kandla cost?

It depends on the number of holds, the residue from the last cargo, the standard the next fixture demands and how much time the call at Kandla actually gives. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Kandla and you get a scoped price, usually the same working day.

Get in touch