Krishnapatnam Port · INKRI

Rope Access Hold Cleaning at Krishnapatnam Port

The upper hold reached without staging

Get a quote

Tell us the vessel, the port and the window. Scoped reply, usually the same working day.

Cleanship Marine provides IRATA rope access teams at Krishnapatnam Port, Andhra Pradesh, to clean, inspect and treat the upper areas of cargo holds — hatch coamings, upper frames, transverse bulkheads and the underside of hatch covers — without staging or cherry pickers.

The top third of a cargo hold is where staging costs, schedule and risk all concentrate, and it is the part a deck-level gang cannot reach properly. Rope access removes the scaffolding from the equation entirely. At Krishnapatnam it also fits the schedule: the upper hold can be worked from ropes while the lower hold is still discharging, so the two do not queue behind each other.

What it gets you

Upper hold areas actually reached and cleaned, not just the parts a gang can stand on
No staging cost, no cherry picker and no lost days erecting and striking it
Structural condition at height inspected while the technicians are already there
Fewer people working at height, under a written plan with a rescue capability

Working conditions at Krishnapatnam

Work here starts alongside, and where the berth window runs out it continues on the outward passage with a riding crew — the berth will not be held open for it. The north-east monsoon sets the outer limits of the calendar, roughly October to December, and it affects the anchorage far more than the berth. Access approval runs through Krishnapatnam Port Company and the terminal, and the disposal route for residues and washings is fixed before the gang boards rather than found afterwards.

Where we work: Deep-draft bulk berths · Container berths · Anchorage
Vessels we see here: Capesize and Panamax bulk carriers · Container ships

What we do at Krishnapatnam

IRATA-certified technicians working to a written rope access plan with a rescue plan in place
Hatch coamings, upper frames, transverse bulkheads and hatch cover undersides cleaned
Spot blasting, rust removal and touch-up coating at height where the scope calls for it
Close visual inspection of upper structure, reported with photographs at position
Work planned around the discharge sequence and the working rules in force at Krishnapatnam
Completion report with before-and-after imagery by hold and by area

Planning the window at Krishnapatnam

The north-east monsoon governs the calendar at Krishnapatnam Port, roughly October to December. The Bay of Bengal also carries cyclone risk in April to June and again from October to December, so an anchorage attendance on this coast is planned with a standby allowance rather than a single fixed date. Turnaround here is quick and the berth will not be held open for cleaning, so the work is either sequenced hold by hold behind the discharge as each one empties, or handed to a riding crew to complete on the passage out. Waiting for all holds to be empty is waiting past the berth window.

Teams mobilise via Chennai (MAA) or Tirupati (TIR), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.

What we typically find at Krishnapatnam

Imported thermal coal dominates, so coal dust is the standing residue — and the fertiliser and edible oil parcels moving through the same port mean the following cargo is often one that will not tolerate any of it. The deep-draft berths take large tonnage, so the hold area is significant even where the residue itself is straightforward.

Krishnapatnam Port runs thermal coal, iron ore and containers through the same holds, and that sequence is where the money is lost: mineral fines and dust from one fixture will fail an inspection for the next if the holds are only swept. The standard that matters is the one the next cargo demands, not the one the last one left.

Standard scope of work

Included as standard on every rope access hold cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.

Upper frame and bulkhead cleaning: Washing and residue removal on upper side frames, brackets, stiffeners and transverse bulkheads that deck-level equipment cannot reach.
Hold overhead and hatch underside: Cleaning of the hold overhead, hatch cover undersides and coaming internals, where cargo dust and previous-cargo residue routinely accumulate.
Close-up visual inspection: Structural condition, coating breakdown and corrosion recorded at height with photographs, giving you inspection-quality data as a by-product of the clean.
Spot preparation and coating: Localised descaling, surface preparation and touch-up coating applied at height, so identified breakdown is treated in the same mobilisation.
Rigging, rescue and supervision: Every work site is rigged with independent working and backup lines under a Level 3 supervisor, with a documented rescue plan in place before the first descent.

Full Hold Cleaning Rope Access service details

How we deliver it at Krishnapatnam

1
Scope and vessel details
Tell us the vessel, her particulars, the last and next cargo and the window at Krishnapatnam. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
2
Approvals and waste routing
Access and working approval is arranged with Krishnapatnam Port Company and the terminal, and the disposal route for residues and washings is fixed before the gang boards — MARPOL Annex V compliance is a documented chain at Krishnapatnam, not an assurance. Where reception is limited, the plan changes rather than the paperwork.
3
Mobilisation to Krishnapatnam
Gangs, pumps, chemicals and equipment mobilise via Chennai (MAA) or Tirupati (TIR). Where a vessel is also calling at Chennai, one mobilisation is normally sized to cover both.
4
Entry, sequencing and the work
Enclosed-space entry runs to the vessel's own permit system, with a fresh gas test before every entry and after every break. Gas testing, standby cover and continuous supervision run throughout, and progress is reported hold by hold rather than only at the end.
5
Report and handover
A completion report covering rope access hold cleaning is issued with before-and-after imagery, hold by hold and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.

Krishnapatnam Port at a glance

UN/LOCODE: INKRI
Port type: Private Port
State: Andhra Pradesh
Country: India
Water body: Bay of Bengal
Port authority: Krishnapatnam Port Company
Main cargoes: Thermal coal, Iron ore, Containers, Fertiliser, Edible oil
Crew mobilisation: Chennai (MAA) / Tirupati (TIR)
Services here: Hull Cleaning, Hold Cleaning and Tank Cleaning

Frequently asked — Rope Access Hold Cleaning at Krishnapatnam

Do you provide rope access hold cleaning at Krishnapatnam Port?

Yes. Cleanship Marine works Krishnapatnam Port (INKRI) in Andhra Pradesh, India, covering the deep-draft bulk berths, container berths and anchorage. Teams mobilise via Chennai (MAA) or Tirupati (TIR) with the full spread.

Can rope access hold cleaning be done while the vessel works cargo at Krishnapatnam?

Partly. Holds are worked one at a time behind the discharge as each empties, but the berth will not be held for the remainder — so the realistic plan is to start alongside and finish with a riding crew on the passage out. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Krishnapatnam and tell you honestly whether the window you have is enough.

How are hold washings and cargo residues disposed of at Krishnapatnam?

To MARPOL Annex V, through the reception route agreed with Krishnapatnam Port Company and the terminal before the gang boards. Residues, sweepings and washing water are tracked from the hold to reception with documentation, so the vessel has a record rather than an assurance. Where reception capacity at Krishnapatnam is limited, we change the plan rather than the paperwork.

Where is the work done at Krishnapatnam — alongside, at anchorage or on passage?

Work here starts alongside, and where the berth window runs out it continues on the outward passage with a riding crew — the berth will not be held open for it.

Which vessels do you carry out rope access hold cleaning on at Krishnapatnam?

Capesize and Panamax bulk carriers, Container ships — the traffic at Krishnapatnam Port runs to thermal coal, iron ore and containers, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.

How quickly can a team mobilise to Krishnapatnam?

Crews and equipment mobilise via Chennai (MAA) or Tirupati (TIR). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Chennai or Ennore, one mobilisation is often sized to cover both.

What does rope access hold cleaning at Krishnapatnam cost?

It depends on the number of holds, the residue from the last cargo, the standard the next fixture demands and how much time the call at Krishnapatnam actually gives. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Krishnapatnam and you get a scoped price, usually the same working day.