By Capt. Neeraj Bharti, Founder, Master Mariner · Published · 2 min read
"Coated vs uncoated cargo tanks: how the changeover plan changes"

The coating inside a cargo tank decides how easily oil comes off. A smooth, intact epoxy releases residue cleanly. Bare steel, with its rust scale and pitting, holds it. The same cleaning sequence can give very different results in each, so the plan should start with the tank surface.
Coated tanks (in good condition)
- Smooth surface releases oil more easily
- Shorter wash cycles and less manual work
- Coating limits on temperature and chemicals apply
- Most suitable for demanding clean grades
Coated tanks (in poor condition)
- Blistering, cracking or breakdown holds black oil
- Patches of bare steel behave like uncoated tanks
- Flakes can contaminate the next cargo
- See end-of-life tank coating
Uncoated (bare steel) tanks
- Rust scale and pitting trap residue
- More washing, more manual work, more sediment
- Rust particles risk particulate contamination and colour
- Some charterers or grades will not accept uncoated tanks for certain clean cargoes
How the plan changes
| Factor | Coated, good | Coated, poor or uncoated |
|---|---|---|
| Wash cycles | Standard | More, longer |
| Manual finishing | Spot work | Extensive |
| Sediment and scale | Low | Higher, must be removed |
| Chemicals | Within coating limits | More often needed |
| Time | Shorter | Longer |
| Grades achievable | Wider range | May be restricted |
Before fixing
Check the coating type and condition in the tank records and recent inspection photos, and ask whether the charterer accepts the tank surface for the nominated grade. If coating is mixed across tanks, the plan may treat tanks differently.
See reading HM 50, the changeover checklist before fixing and the DPP to CPP changeover guide.
How Cleanship helps
We plan changeovers around the actual tank surface, including tanks with poor or no coating, from our bases at Fujairah and in India. See our DPP and CPP tank cleaning service or contact us.
Sources & further reading
Frequently asked questions
Are coated tanks easier to clean than uncoated tanks?
Yes, in good condition. A smooth intact coating releases oil more easily than bare steel with rust scale and pitting.
Can uncoated tanks carry clean products?
Some clean grades can be carried in uncoated tanks, but more cleaning is needed and some charterers or grades will not accept them.
What happens if a tank coating is breaking down?
Damaged areas hold black oil and may shed flakes, making the tank behave more like an uncoated one and increasing contamination risk.
Should coating condition be checked before fixing a clean cargo?
Yes. The coating type and condition decide how much cleaning is needed and which grades are realistic.
- coated cargo tanks
- uncoated tanks tanker cleaning
- epoxy coated tanks changeover
- bare steel tank cleaning
- tank coating changeover
Related articles
- Tank cleaning"Tank cleaning chemicals for DPP residues: selection, application and rinsing"When chemicals help in a DPP to CPP changeover, the main types used, how they are applied, and why rinsing, coating compatibility and MARPOL rules matter as much as the chemical itself.
- Tank cleaning"Hot water or ambient seawater? Choosing wash temperature after black oil"When hot water washing is needed after fuel oil and other black oils, when ambient seawater is enough, and how temperature, cargo properties and coating limits shape the choice.
- Tank cleaning"Biofuel blends after DPP: extra checks before loading FAME or HVO grades"What changes when the clean cargo after a DPP changeover is a biofuel or a biofuel blend, how FAME and HVO differ, and which extra checks on tanks, coatings and previous cargoes make sense.
- Tank cleaning"Dark condensate as last cargo: clean or dirty when preparing tanks?"How to treat condensate as a previous cargo when preparing tanker tanks, why "light" condensates can still leave dark residue, and how to plan the cleaning for the next grade.

