By Capt. Neeraj Bharti, Founder, Master Mariner · Published · 2 min read
"Tank cleaning chemicals for DPP residues: selection, application and rinsing"

Chemicals can make a changeover faster and more reliable, or they can leave behind a residue of their own that fails the inspection. The difference comes down to choosing the right product, applying it properly and rinsing it off completely.
When chemicals help
- Stubborn black oil film that hot washing doesn't fully remove
- Waxy residue from crude or condensate
- Spot cleaning of stains in shadow areas and on coils
- Older coatings that hold residue
They are not a substitute for proper hot washing and draining. They are a step in the sequence.
Common types
- Degreasers and emulsifiers: break up oil film so it can be washed off
- Solvent-based cleaners: dissolve heavier residue (used with care and within safety limits)
- Detergents: often used in recirculation or for final cleaning
- Specialist products: for wax, odour or specific contaminants
Selection depends on the previous cargo, the coating, the next grade and the inspection standard.
Application methods
- Injection into wash water through the machine system
- Recirculation of a chemical solution through the cleaning machines
- Spraying or hand application to specific areas
- Soaking heating coils or specific spots
Each method should follow the manufacturer's instructions on concentration, temperature and contact time.
Rinsing is part of the job
Chemicals left on the tank surface or in the lines can contaminate the next cargo, interfere with wall wash tests, or give an odour. Thorough rinsing with seawater and fresh water as required, followed by draining, is essential.
Coatings and MARPOL
- Coating compatibility: check the product against the coating maker's resistance list.
- Disposal: tank washings containing cleaning chemicals must be handled under MARPOL rules for slops and discharge. Use products that are acceptable for the intended disposal route.
- Safety data: crew need the safety data sheet, PPE and handling instructions.
See the slop tank in a changeover and hot or ambient washing.
How Cleanship helps
We select and apply chemicals as part of a planned changeover, with full rinsing and records, from our bases at Fujairah and in India. See our DPP and CPP tank cleaning service or contact us.
Sources & further reading
Frequently asked questions
Are chemicals needed for every DPP to CPP changeover?
No. Many changeovers rely mainly on hot washing and manual finishing. Chemicals help with stubborn film, wax, stains and older coatings.
Can tank cleaning chemicals contaminate the next cargo?
Yes, if not rinsed off completely. Residual chemicals can affect cargo quality, wall wash tests and odour.
How are tank cleaning chemicals applied?
By injection into wash water, recirculation, spraying or hand application, or soaking specific parts, following the manufacturer's instructions.
Do tank washings with chemicals have disposal rules?
Yes. Washings must be handled under MARPOL requirements for slops and discharge, so the chemical should suit the intended disposal route.
- tank cleaning chemicals
- tanker cleaning detergent
- chemical tank washing DPP
- degreaser tank cleaning
- tank cleaning chemical rinsing
Related articles
- Tank cleaning"Hot water or ambient seawater? Choosing wash temperature after black oil"When hot water washing is needed after fuel oil and other black oils, when ambient seawater is enough, and how temperature, cargo properties and coating limits shape the choice.
- Tank cleaning"Biofuel blends after DPP: extra checks before loading FAME or HVO grades"What changes when the clean cargo after a DPP changeover is a biofuel or a biofuel blend, how FAME and HVO differ, and which extra checks on tanks, coatings and previous cargoes make sense.
- Tank cleaning"Dark condensate as last cargo: clean or dirty when preparing tanks?"How to treat condensate as a previous cargo when preparing tanker tanks, why "light" condensates can still leave dark residue, and how to plan the cleaning for the next grade.
- Tank cleaningDPP to gasoline and naphtha: colour, odour and sulphur risk on the first clean cargoWhy gasoline and naphtha are demanding first clean cargoes after dirty petroleum products, what usually goes wrong, and how to prepare the tanks and system to protect colour, sulphur and odour.

