Colombo Port · LKCMB

Hold Cleaning Riding Crew at Colombo Port

Holds cleaned on passage, no port time spent

Get a quote

Tell us the vessel, the port and the window. Scoped reply, usually the same working day.

Cleanship Marine embarks riding crews at Colombo Port, Western Province, to clean cargo holds on the passage out. The gang joins here, works the holds at sea and disembarks at a nominated port — the cleaning costs the vessel no port time at all.

Every other way of cleaning holds competes with something — the discharge, the berth window, the crew's own work. A riding crew competes with nothing: the work happens on a passage the vessel was making anyway. That is why it is the standard answer for tonnage leaving Colombo on a ballast leg with a clean-cargo fixture waiting at the other end, and why it is the only method whose cost does not rise when the port gets busy.

What it gets you

Zero port time spent on hold cleaning — the work happens on a passage already being made
Holds ready for inspection on arrival rather than starting the job there
Ship's crew kept on watchkeeping and maintenance instead of cleaning
One team and one standard across a multi-port voyage

Working conditions at Colombo

Work here runs both alongside and at anchorage depending on the call, and on the passage out where neither gives enough time. The two monsoons sets the outer limits of the calendar, the south-west from May to September and the north-east from December to February, and it affects the anchorage far more than the berth. Humidity is high year-round rather than seasonal, so enclosed-space work here is planned with ventilation and rest cycles in every month, not just the summer. Access approval runs through Sri Lanka Ports Authority and the terminal, and the disposal route for residues and washings is fixed before the gang boards rather than found afterwards.

Where we work: Container terminal berths · Bunkering anchorage · General cargo quays
Vessels we see here: Main-line and feeder container ships · Bunker tankers and barges · General cargo ships · Cruise ships

What we do at Colombo

Crew embarked at Colombo with tools, chemicals and PPE, cleared through the agent and the port
Full hold cleaning programme worked at sea, hold by hold, to the standard the next fixture requires
Bilge wells, strum boxes and hold bilge lines cleaned and tested on passage
Enclosed-space entry procedures, gas testing and safety supervision run to the vessel's own permit system
Disembarkation at the nominated port arranged with visas, tickets and clearances handled
Daily progress reporting to the vessel and the office, with a completion record on landing

Planning the window at Colombo

The two monsoons governs the calendar at Colombo Port, the south-west from May to September and the north-east from December to February. For hold work the wind matters less than the rain: holds cannot be washed, dried and closed in wet weather, and a hold shut up damp fails inspection however clean it looks. Some vessels sit and some turn straight round, so the plan is agreed against the actual call rather than a standard package: a shore gang alongside where there is time, a riding crew on the outward passage where there is not.

Cleanship holds an operating base at Colombo, so we can hold a team ready against a shifting ETA rather than committing travel to a date that may move.

What we typically find at Colombo

Agricultural and fertiliser parcels dominate here, and they are the unforgiving residues: hygroscopic, corrosive to coatings if left damp, and an outright inspection failure ahead of a food-grade cargo. Holds shut up wet at Colombo are holds that need doing twice.

The condition we find here varies more than at most ports, because some vessels have had days at anchor to work the holds and some have had none. The scope is confirmed on boarding rather than assumed from the fixture.

Standard scope of work

Included as standard on every riding crew hold cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.

Passage planning of the cleaning programme: The cleaning sequence is planned against the passage length, expected weather and ballast condition so every hold is completed with drying time in hand.
Complete hold preparation: Sweeping, washing, chemical treatment, rinsing and drying of all cargo holds to the agreed standard, exactly as delivered by a shore gang.
Hatch cover and coaming work: Cleaning of compression bars, drain channels and gaskets, with defects reported to the chief officer for rectification before loading.
Bilge and drainage systems: Bilge wells emptied and cleaned, strainers cleared and non-return valves tested so holds pass the water-ingress checks at inspection.
Additional deck work: Where the passage allows, the crew can extend to deck chipping, spot priming and painting under the same mobilisation.

Full Hold Cleaning Riding Crew service details

How we deliver it at Colombo

1
Scope and vessel details
Tell us the vessel, her particulars, the last and next cargo and the window at Colombo. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
2
Approvals and waste routing
Sri Lanka Ports Authority runs a statutory permit process here, so the lead time is real and the application goes in early rather than on arrival. The disposal route for residues and washings is fixed before the gang boards — MARPOL Annex V compliance is a documented chain, not an assurance. Where reception at Colombo is limited, the plan changes rather than the paperwork.
3
Mobilisation to Colombo
Cleanship holds an operating base at Colombo, so gangs, pumps, chemicals and equipment are on the ground rather than in transit. That is the difference between meeting a window and missing it.
4
Entry, sequencing and the work
Enclosed-space entry runs to the vessel's own permit system, with a fresh gas test before every entry and after every break. Gas testing, standby cover and continuous supervision run throughout, and progress is reported hold by hold rather than only at the end.
5
Report and handover
A completion report covering riding crew hold cleaning is issued with before-and-after imagery, hold by hold and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.

Colombo Port at a glance

UN/LOCODE: LKCMB
Port type: Major Port
State: Western Province
Country: Sri Lanka
Water body: Indian Ocean
Port authority: Sri Lanka Ports Authority
Main cargoes: Containers and transhipment, Bunkers, General cargo, Cement and dry bulk, Tea and agricultural cargo
Crew mobilisation: Colombo (CMB)
Services here: Hull Cleaning, Hold Cleaning and Tank Cleaning

Frequently asked — Hold Cleaning Riding Crew at Colombo

Do you provide riding crew hold cleaning at Colombo Port?

Yes. Cleanship Marine works Colombo Port (LKCMB) in Western Province, Sri Lanka, covering the container terminal berths, bunkering anchorage and general cargo quays. We hold an operating base at Colombo, so people and equipment are held locally rather than mobilised against a window.

Can riding crew hold cleaning be done while the vessel works cargo at Colombo?

It depends on the call. Where the vessel has time, a shore gang works the holds alongside as they empty; where she turns straight round, a riding crew completes them on the passage. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Colombo and tell you honestly whether the window you have is enough.

How are hold washings and cargo residues disposed of at Colombo?

To MARPOL Annex V, through the reception route agreed with Sri Lanka Ports Authority and the terminal before the gang boards. Residues, sweepings and washing water are tracked from the hold to reception with documentation, so the vessel has a record rather than an assurance. Where reception capacity at Colombo is limited, we change the plan rather than the paperwork.

Where is the work done at Colombo — alongside, at anchorage or on passage?

Work here runs both alongside and at anchorage depending on the call, and on the passage out where neither gives enough time. Between June and September the binding constraint is working temperature inside the space rather than access to it.

Which vessels do you carry out riding crew hold cleaning on at Colombo?

Main-line and feeder container ships, Bunker tankers and barges, General cargo ships, Cruise ships — the traffic at Colombo Port runs to containers and transhipment, bunkers, general cargo, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.

How quickly can a team mobilise to Colombo?

Cleanship keeps an operating base at Colombo, so response here is fast — the constraint is normally the approvals and the working window rather than getting crews and equipment to the port.

What does riding crew hold cleaning at Colombo cost?

It depends on the number of holds, the residue from the last cargo, the standard the next fixture demands and how much time the call at Colombo actually gives. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Colombo and you get a scoped price, usually the same working day.

Get in touch