Offshore Vessel Tank Cleaning at Porbandar Port
Mud, brine and base oil tanks turned round between charters
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine cleans offshore support vessel tanks at Porbandar Port, Gujarat — drilling mud, brine, base oil, cement and bulk tanks turned round between charters and prepared for the next product.
An OSV between charters is an asset earning nothing, and the tank turnaround is usually the item on the critical path. The products involved — mud, brine, base oil, cement — each leave a different residue and need a different method, so the plan is built product by product rather than tank by tank.
What it gets you
- Vessel handed to the next charter on time rather than held on the tank turnaround
- Cross-contamination between products avoided
- Inspection passed at the first attempt
- Disposal documented, not improvised
Working conditions at Porbandar
Work here runs both alongside and at anchorage depending on the call, and on the passage out where neither gives enough time. The south-west monsoon sets the outer limits of the calendar, roughly June to September, and it affects the anchorage far more than the berth. Approval runs through Gujarat Maritime Board and the terminal operator, and licensed slop reception is booked before the tanks are opened — at most ports on this list that booking, not the cleaning, is what sets the date.
- Where we work
- Breakwater harbour berths · Outer anchorage
- Vessels we see here
- Handysize bulk carriers · Coastal tankers · Fishing and support craft
What we do at Porbandar
- Product-specific cleaning plan for mud, brine, base oil, cement and bulk tanks
- Gas-freeing, atmosphere testing and enclosed-space entry certification
- Manual and mechanical cleaning of tanks, lines, valves and pump rooms
- Preparation and presentation for the incoming charterer's inspection
- Residue and washings disposed of through licensed reception at Porbandar
- Tank-by-tank completion record for the vessel and the charterer
Planning the window at Porbandar
The south-west monsoon governs the calendar at Porbandar Port, roughly June to September. Swell and reduced surface visibility close most open-water work on this coast for the duration, and the weeks either side are unreliable rather than unusable. Whether the work runs alongside, at anchorage or on passage depends on the terminal and the grade, so the plan is built against the actual call. Where a terminal will not permit tank work at the berth, we say so at quoting stage rather than after mobilisation.
Teams mobilise via Porbandar (PBD) or Jamnagar (JGA), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Porbandar
Tank work at Porbandar is coastal fuel and support craft — bunker, slop and fuel tanks rather than cargo grade changes — with the fishing fleet adding a steady stream of small-tank work. Larger tonnage is worked at the anchorage outside the harbour.
Product parcels and bunkers dominate the liquid traffic here, so most of the work is grade changes and fuel and slop tank cleaning rather than full chemical specification work.
Standard scope of work
Included as standard on every offshore vessel tank cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Fluid recovery and stripping
- Residual mud, brine and base oil are recovered and transferred to nominated tanks, road tankers or shore reception.
- Tank washing
- Machine and manual washing appropriate to the fluid type, with particular attention to settled solids in mud and cement tanks.
- Line and pump flushing
- Associated pipework, pumps and manifolds are flushed so cross-contamination does not reappear from the system after the tank is clean.
- Survey preparation
- Tanks are cleaned and dried to a condition suitable for coating inspection and class survey attendance.
- Waste management
- Recovered fluids and solids are consolidated and landed to licensed facilities with manifests issued.
How we deliver it at Porbandar
- 1
Scope and vessel details
Tell us the vessel, her particulars, the prior and next grade and the window at Porbandar. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Approvals, slops and certification
Terminal and port approval for tank work is obtained from Gujarat Maritime Board and the terminal operator, licensed slop and sludge reception is booked, and marine chemist attendance is arranged where the grade change requires it. At Porbandar the disposal route is the item that most often sets the schedule, so it is fixed first.
- 3
Mobilisation to Porbandar
Crews, pumps, machines and chemicals mobilise via Porbandar (PBD) or Jamnagar (JGA). Where a vessel is also calling at Okha, one mobilisation is normally sized to cover both.
- 4
Gas-freeing, entry and cleaning
Atmosphere testing, gas-freeing and enclosed-space entry certification come before any entry, and are repeated after every break. Standby cover and atmosphere monitoring run continuously while anyone is inside, and progress is reported tank by tank.
- 5
Report and handover
A completion report covering offshore vessel tank cleaning is issued with before-and-after imagery, tank by tank and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Porbandar Port at a glance
- UN/LOCODE
- INPBD
- Port type
- State Port
- State
- Gujarat
- Country
- India
- Water body
- Arabian Sea
- Port authority
- Gujarat Maritime Board
- Main cargoes
- Bauxite, Clinker and cement, Soda ash, Fishing catch, Coastal fuel
- Crew mobilisation
- Porbandar (PBD) / Jamnagar (JGA)
- Services here
- Hull Cleaning, Hold Cleaning and Tank Cleaning
Frequently asked — OSV Tank Cleaning at Porbandar
Do you provide offshore vessel tank cleaning at Porbandar Port?
Yes. Cleanship Marine works Porbandar Port (INPBD) in Gujarat, India, covering the breakwater harbour berths and outer anchorage. Teams mobilise via Porbandar (PBD) or Jamnagar (JGA) with the full spread.
Can offshore vessel tank cleaning be done while the vessel works cargo at Porbandar?
It depends on the terminal and the grade. Some berths here permit tank work alongside and some do not; we establish which before the vessel arrives and plan for the anchorage or the passage where the answer is no. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Porbandar and tell you honestly whether the window you have is enough.
How is slop and sludge disposal handled at Porbandar?
Through licensed reception, booked with Gujarat Maritime Board and the terminal operator before the tanks are opened. At Porbandar the disposal route is usually what sets the schedule, so it is fixed first and documented tank by tank. Gas-freeing, atmosphere testing and enclosed-space entry certification are part of the same scope.
Where is the work done at Porbandar — alongside, at anchorage or on passage?
Work here runs both alongside and at anchorage depending on the call, and on the passage out where neither gives enough time.
Which vessels do you carry out offshore vessel tank cleaning on at Porbandar?
Handysize bulk carriers, Coastal tankers, Fishing and support craft — the traffic at Porbandar Port runs to bauxite, clinker and cement, soda ash, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Porbandar?
Crews and equipment mobilise via Porbandar (PBD) or Jamnagar (JGA). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Okha or Pipavav, one mobilisation is often sized to cover both.
What does offshore vessel tank cleaning at Porbandar cost?
It depends on the tank count and volume, the prior and next grade, how much sludge is in there and whether the work runs alongside, at anchorage or on passage from Porbandar. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Porbandar and you get a scoped price, usually the same working day.
Offshore Vessel Tank Cleaning at Porbandar Port.
Tell us the vessel, her ETA at Porbandar and the window. You get a scope, a crew size and an honest duration — usually the same working day.