By Capt. Neeraj Bharti, Founder, Master Mariner · Published · 1 min read
"Shadow areas: getting tank cleaning machines to reach everything"

A fixed tank cleaning machine sprays in straight lines. Anything that blocks those lines, a frame, a bracket, a ladder, a pipe, leaves a patch behind it that the jet never touches. Those patches are shadow areas, and they are where inspectors look first.
Where shadows form
- Behind web frames, stringers and brackets
- Under and behind ladders, platforms and pipes
- Around heating coils and their supports
- On the underside of horizontal structure
- Behind pump wells, suction bellmouths and sumps
Tanks with heavy internal structure (for example, older designs or tanks with deep frames) have more shadow than smooth-walled tanks.
The shadow diagram
Most tankers have a tank cleaning plan or shadow diagram showing where fixed machines reach and where they don't. Use it to:
- Plan portable machine drops to cover known shadows
- Direct manual cleaning to the right places
- Brief the inspection team on what has been done
If the diagram is missing or doesn't match the tank (after modifications, for example), map the shadows during the first inspection.
How to clean shadow areas
- Portable machines dropped through deck openings at points that cover the shadows.
- Adjusted programmes on programmable fixed machines to concentrate on certain angles.
- Manual cleaning: wiping, scrubbing, spot cleaning with suitable chemicals.
- Final check with good lighting before the tank is offered for inspection.
See mopping, spot cleaning and drying.
Why it matters in a changeover
Black oil in a shadow is still black oil. Leaving it can mean a failed inspection or colour in the next cargo. See failed tank inspection after a changeover.
How Cleanship helps
We plan around the shadow diagram and finish shadow areas by hand, from our bases at Fujairah and in India. See our DPP and CPP tank cleaning service or contact us.
Sources & further reading
Frequently asked questions
What are shadow areas in tank cleaning?
Parts of a cargo tank that fixed cleaning machine jets cannot reach directly because structure, pipes or fittings block the spray.
What is a tank cleaning shadow diagram?
A plan showing where fixed machines reach and where they don't, used to plan portable machine drops and manual cleaning.
How are shadow areas cleaned?
With portable machines placed to cover them, adjusted machine programmes and manual cleaning, followed by a lit inspection.
Do shadow areas cause failed tank inspections?
Often. Inspectors check them first, and residue left there is a common reason for rejection.
- shadow areas tank cleaning
- tank cleaning machine coverage
- shadow diagram tanker
- tank cleaning blind spots
- fixed tank cleaning machines
Related articles
- Tank cleaning"Coated vs uncoated cargo tanks: how the changeover plan changes"How epoxy-coated, other coated and uncoated (bare steel) cargo tanks behave during a DPP to CPP changeover, and how the cleaning plan, time and risk change with each.
- Tank cleaning"Tank cleaning chemicals for DPP residues: selection, application and rinsing"When chemicals help in a DPP to CPP changeover, the main types used, how they are applied, and why rinsing, coating compatibility and MARPOL rules matter as much as the chemical itself.
- Tank cleaning"Hot water or ambient seawater? Choosing wash temperature after black oil"When hot water washing is needed after fuel oil and other black oils, when ambient seawater is enough, and how temperature, cargo properties and coating limits shape the choice.
- Tank cleaning"Biofuel blends after DPP: extra checks before loading FAME or HVO grades"What changes when the clean cargo after a DPP changeover is a biofuel or a biofuel blend, how FAME and HVO differ, and which extra checks on tanks, coatings and previous cargoes make sense.

