King Abdullah Port · SAKAC

Rope Access Hold Cleaning at King Abdullah Port

The upper hold reached without staging

Get a quote

Tell us the vessel, the port and the window. Scoped reply, usually the same working day.

Cleanship Marine provides IRATA rope access teams at King Abdullah Port, Makkah Province, to clean, inspect and treat the upper areas of cargo holds — hatch coamings, upper frames, transverse bulkheads and the underside of hatch covers — without staging or cherry pickers.

The top third of a cargo hold is where staging costs, schedule and risk all concentrate, and it is the part a deck-level gang cannot reach properly. Rope access removes the scaffolding from the equation entirely. At King Abdullah Port it also fits the schedule: the upper hold can be worked from ropes while the lower hold is still discharging, so the two do not queue behind each other.

What it gets you

Upper hold areas actually reached and cleaned, not just the parts a gang can stand on
No staging cost, no cherry picker and no lost days erecting and striking it
Structural condition at height inspected while the technicians are already there
Fewer people working at height, under a written plan with a rescue capability

Working conditions at King Abdullah Port

Work here starts alongside, and where the berth window runs out it continues on the outward passage with a riding crew — the berth will not be held open for it. The northerly Red Sea wind sets the outer limits of the calendar, strongest through the winter and spring, and it affects the anchorage far more than the berth. Heat and humidity are the harder constraint. The Red Sea is among the warmest and most saline bodies of water the fleet trades in — which grows fouling faster than the Gulf does — and between June and September enclosed-space work runs to shortened cycles with enforced rest and forced ventilation. Access approval runs through King Abdullah Port and Mawani and the terminal, and the disposal route for residues and washings is fixed before the gang boards rather than found afterwards.

Where we work: Container terminal berths · RoRo and bulk berths · Anchorage
Vessels we see here: Main-line and feeder container ships · Pure car and truck carriers · Bulk carriers

What we do at King Abdullah Port

IRATA-certified technicians working to a written rope access plan with a rescue plan in place
Hatch coamings, upper frames, transverse bulkheads and hatch cover undersides cleaned
Spot blasting, rust removal and touch-up coating at height where the scope calls for it
Close visual inspection of upper structure, reported with photographs at position
Work planned around the discharge sequence and the working rules in force at King Abdullah Port
Completion report with before-and-after imagery by hold and by area

Planning the window at King Abdullah Port

The northerly Red Sea wind governs the calendar at King Abdullah Port, strongest through the winter and spring. For hold work the wind matters less than the rain: holds cannot be washed, dried and closed in wet weather, and a hold shut up damp fails inspection however clean it looks. Turnaround here is quick and the berth will not be held open for cleaning, so the work is either sequenced hold by hold behind the discharge as each one empties, or handed to a riding crew to complete on the passage out. Waiting for all holds to be empty is waiting past the berth window.

Teams mobilise via Jeddah (JED), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.

What we typically find at King Abdullah Port

This is container and unitised tonnage, so the scope is cell guides, hold bilges, bilge wells, tank tops and lashing gear rather than a bulk residue clean — steady maintenance work at height and in confined spaces, on ships that will not extend a berth window for it.

What we usually find here is a partial job already attempted: crew sweeping between grabs, with the frames, brackets and tank-top margins untouched because there was never the time to reach them. Those are exactly the places an inspection looks.

Standard scope of work

Included as standard on every rope access hold cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.

Upper frame and bulkhead cleaning: Washing and residue removal on upper side frames, brackets, stiffeners and transverse bulkheads that deck-level equipment cannot reach.
Hold overhead and hatch underside: Cleaning of the hold overhead, hatch cover undersides and coaming internals, where cargo dust and previous-cargo residue routinely accumulate.
Close-up visual inspection: Structural condition, coating breakdown and corrosion recorded at height with photographs, giving you inspection-quality data as a by-product of the clean.
Spot preparation and coating: Localised descaling, surface preparation and touch-up coating applied at height, so identified breakdown is treated in the same mobilisation.
Rigging, rescue and supervision: Every work site is rigged with independent working and backup lines under a Level 3 supervisor, with a documented rescue plan in place before the first descent.

Full Hold Cleaning Rope Access service details

How we deliver it at King Abdullah Port

1
Scope and vessel details
Tell us the vessel, her particulars, the last and next cargo and the window at King Abdullah Port. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
2
Approvals and waste routing
Access at King Abdullah Port is the terminal operator's decision as much as King Abdullah Port and Mawani's, so both are in the approval chain from the start — a berth-side refusal discovered at the gangway costs the whole attendance. The disposal route for residues and washings is fixed before the gang boards — MARPOL Annex V compliance is a documented chain, not an assurance. Where reception at King Abdullah Port is limited, the plan changes rather than the paperwork.
3
Mobilisation to King Abdullah Port
Gangs, pumps, chemicals and equipment mobilise via Jeddah (JED). Where a vessel is also calling at Jeddah, one mobilisation is normally sized to cover both.
4
Entry, sequencing and the work
Enclosed-space entry runs to the vessel's own permit system, with a fresh gas test before every entry and after every break. Gas testing, standby cover and continuous supervision run throughout, and progress is reported hold by hold rather than only at the end.
5
Report and handover
A completion report covering rope access hold cleaning is issued with before-and-after imagery, hold by hold and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.

King Abdullah Port at a glance

UN/LOCODE: SAKAC
Port type: Private Port
State: Makkah Province
Country: Saudi Arabia
Water body: Red Sea
Port authority: King Abdullah Port and Mawani
Main cargoes: Containers and transhipment, RoRo and vehicles, Dry bulk, General cargo
Crew mobilisation: Jeddah (JED)
Services here: Hull Cleaning and Hold Cleaning

Frequently asked — Rope Access Hold Cleaning at King Abdullah Port

Do you provide rope access hold cleaning at King Abdullah Port?

Yes. Cleanship Marine works King Abdullah Port (SAKAC) in Makkah Province, Saudi Arabia, covering the container terminal berths, RoRo and bulk berths, anchorage. Teams mobilise via Jeddah (JED) with the full spread.

Can rope access hold cleaning be done while the vessel works cargo at King Abdullah Port?

Partly. Holds are worked one at a time behind the discharge as each empties, but the berth will not be held for the remainder — so the realistic plan is to start alongside and finish with a riding crew on the passage out. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at King Abdullah Port and tell you honestly whether the window you have is enough.

How are hold washings and cargo residues disposed of at King Abdullah Port?

To MARPOL Annex V, through the reception route agreed with King Abdullah Port and Mawani and the terminal before the gang boards. Residues, sweepings and washing water are tracked from the hold to reception with documentation, so the vessel has a record rather than an assurance. Where reception capacity at King Abdullah Port is limited, we change the plan rather than the paperwork.

Where is the work done at King Abdullah Port — alongside, at anchorage or on passage?

Work here starts alongside, and where the berth window runs out it continues on the outward passage with a riding crew — the berth will not be held open for it. Between June and September the binding constraint is working temperature inside the space rather than access to it.

Which vessels do you carry out rope access hold cleaning on at King Abdullah Port?

Main-line and feeder container ships, Pure car and truck carriers, Bulk carriers — the traffic at King Abdullah Port runs to containers and transhipment, RoRo and vehicles, dry bulk, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.

How quickly can a team mobilise to King Abdullah Port?

Crews and equipment mobilise via Jeddah (JED). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Jeddah or Yanbu, one mobilisation is often sized to cover both.

What does rope access hold cleaning at King Abdullah Port cost?

It depends on the number of holds, the residue from the last cargo, the standard the next fixture demands and how much time the call at King Abdullah Port actually gives. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at King Abdullah Port and you get a scoped price, usually the same working day.