Underwater Hull Cleaning at Tema Port
Full hull cleaned in the water, vessel stays on hire
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine provides underwater hull cleaning at Tema Port, Greater Accra, working the container terminal berths, bulk and general cargo quays. Commercial dive teams remove slime, weed and shell growth from the vertical sides, flat bottom, bilge keels, sea chests and niche areas with the vessel afloat and on hire — no dry dock, no diversion, no off-hire.
Tema is Ghana's principal container port and the gateway for Accra and the interior, working clinker, grain and refined products alongside the box traffic. Liner tonnage on fixed rotations makes it a port where in-water work is a planned maintenance item.
What it gets you
- Hydrodynamic smoothness restored before fouling reaches the calcareous stage that damages coating
- Fuel and emissions penalty from drag reduced without taking the vessel off hire
- Documented condition record for the technical file and the next docking specification
- Sea chests and inlets cleared, protecting cooling water flow
Working conditions at Tema
Tema is a large artificial harbour serving Accra, well sheltered and with a modern container terminal that runs to tight productivity targets — the berth will not be held for anything. Work here is either sequenced behind cargo operations or taken at the anchorage. The harbour water is warm and turbid with moderate to low visibility, and fouling returns quickly.
- Where we work
- Container terminal berths · Bulk and general cargo quays · Oil berth · Anchorage
- Vessels we see here
- Main-line and feeder container ships · Handysize bulk carriers · Product tankers · Fishing fleet and reefer vessels
What we do at Tema
- Pre-clean fouling survey to establish coverage, growth type and coating condition before any tool touches the hull
- Brush cart cleaning of the flat bottom and vertical sides, with brush hardness selected against your antifouling specification
- Hand cleaning of bilge keels, rudder, stern frame, thruster tunnels, anodes and the niches a cart cannot follow
- Sea chest gratings and inlet openings cleared of growth and debris to restore cooling water flow
- Diving permission cleared with Ghana Ports and Harbours Authority and the terminal before mobilisation
- Before-and-after video and stills, with a written report on coating condition and anode wastage
Planning the window at Tema
The Atlantic swell and the rains governs the calendar at Tema Port, with the heaviest rain from May to October and swell running year-round. The swell here is long-period Atlantic ground swell rather than wind-driven sea, so it reaches the anchorages on days that look calm from the bridge and it is the single biggest cause of a lost in-water window on this coast. Because the harbour is sheltered, work here normally runs alongside or at a protected anchorage and can proceed in parallel with cargo operations rather than competing with them for the berth window.
Work is taken at the container terminal berths, bulk and general cargo quays, oil berth, anchorage, and which of those a vessel ends up at changes the dive plan more than the season does. Teams mobilise via Accra (ACC), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Tema
Dry bulk handling here puts cargo dust into the water around the berths and anchorage. It settles on horizontal surfaces and packs into sea chest gratings and inlet openings, so inlet and grating clearance is routinely a larger part of the job at Tema than owners budget for.
Shelter is a mixed blessing for a hull. The same calm that makes the port easy to work in is still water, and still water grows fouling faster than an exposed berth does.
Standard scope of work
Included as standard on every underwater hull cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Fouling survey
- A pre-clean dive establishes fouling type, coverage and severity, and confirms coating condition so the correct tooling is selected.
- Flat bottom and vertical sides
- Brush cart cleaning of large areas, removing slime, weed and shell growth to restore surface smoothness.
- Niche areas
- Hand cleaning of bilge keels, bow thruster tunnels, rudder, stern frame, anodes and other niche areas where fouling concentrates.
- Sea chests and gratings
- Sea chest gratings and inlet openings cleared of growth and debris to restore cooling water flow.
- Documentation
- Underwater video and stills before and after, with a written report covering coating condition and anode wastage.
How we deliver it at Tema
- 1
Scope and vessel details
Tell us the vessel, her particulars, the coating specification and the window at Tema. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Permits and approvals
Ghana Ports and Harbours Authority approves the work alongside the local harbour master, and at a state port that conversation is quicker but less formal — it is worth having in writing. Diving permission, terminal approval and any environmental clearance for in-water work are handled by us, not left with the agent to chase.
- 3
Mobilisation to Tema
Divers, compressors, brush carts and cameras mobilise via Accra (ACC). Where a vessel is also calling at Takoradi, one mobilisation is normally sized to cover both.
- 4
Safety setup and the dive
The vessel is secured for diving — main engine, shaft and thrusters immobilised, sea suctions confirmed shut, permit agreed with the master. Teams work under surface supervision with continuous diver communications and video throughout.
- 5
Report and handover
A completion report covering underwater hull cleaning is issued with before-and-after imagery, coating and anode condition and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Tema Port at a glance
- UN/LOCODE
- GHTEM
- Port type
- State Port
- State
- Greater Accra
- Country
- Ghana
- Water body
- Gulf of Guinea
- Port authority
- Ghana Ports and Harbours Authority
- Main cargoes
- Containers, Clinker and cement, Grain and agricultural bulk, Crude and refined products, General cargo, Fishing catch
- Crew mobilisation
- Accra (ACC)
- Services here
- Hull Cleaning, Hold Cleaning and Tank Cleaning
Frequently asked — Underwater Hull Cleaning at Tema
Do you provide underwater hull cleaning at Tema Port?
Yes. Cleanship Marine works Tema Port (GHTEM) in Greater Accra, Ghana, covering the container terminal berths, bulk and general cargo quays, oil berth, anchorage. Teams mobilise via Accra (ACC) with the full spread.
Can underwater hull cleaning be done while the vessel works cargo at Tema?
Yes, in most cases. The harbour is sheltered enough that divers work alongside while cargo operations continue, and neither holds the other up. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Tema and tell you honestly whether the window you have is enough.
Do you need a diving permit from Ghana Ports and Harbours Authority?
Yes, and we obtain it. Diving permission from Ghana Ports and Harbours Authority, terminal approval where the berth requires it, and any environmental clearance for in-water work are arranged as part of the job rather than left with the agent. The master's permit to work and the immobilisation of machinery are agreed on board before anyone enters the water.
What is underwater visibility like at Tema?
Visibility at Tema Port is moderate, and it drops further around active bulk handling and after heavy rain, and the Atlantic swell and the rains sets the outer limits of the calendar. How the tide and sea state shape the dive plan is set out in full in the working-conditions section on this page.
Which vessels do you carry out underwater hull cleaning on at Tema?
Main-line and feeder container ships, Handysize bulk carriers, Product tankers, Fishing fleet and reefer vessels — the traffic at Tema Port runs to containers, clinker and cement, grain and agricultural bulk, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Tema?
Divers and equipment mobilise via Accra (ACC). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Takoradi or Lomé, one mobilisation is often sized to cover both.
What does underwater hull cleaning at Tema cost?
It depends on the vessel's dimensions and wetted area, the fouling state found, the coating specification and the working window available at Tema. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Tema and you get a scoped price, usually the same working day.
Underwater Hull Cleaning at Tema Port.
Tell us the vessel, her ETA at Tema and the window. You get a scope, a crew size and an honest duration — usually the same working day.