In-Water Class Survey at Haldia Port
Class attendance without opening a dry dock
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine delivers class-approved in-water surveys at Haldia Port, West Bengal, with high-definition live video to a surface monitoring station, diver-to-surveyor communications and a full report package for the class file.
Classification societies accept in-water survey in place of drydocking for many vessels and inspection scopes, provided the work is done by an approved diving contractor to a defined procedure with the surveyor able to see the structure in real time. River visibility here rules out conventional wide-shot survey video, so any class attendance has to be agreed in advance on a close-quarters, high-intensity lighting basis, and some scopes will simply not be accepted in these conditions. We will say so before you book the surveyor rather than after.
What it gets you
- Survey requirement satisfied without opening a dry dock or taking the vessel off hire
- Surveyor sees the structure live rather than reviewing a recording after the fact
- Defects located precisely against hull reference marks, not described approximately
- A report package built for the class file, not a video dump
Working conditions at Haldia
Haldia is a riverine port on the Hooghly, and the river runs a strong tidal stream carrying a very heavy silt load. Underwater visibility is effectively nil for most of the year, so cleaning and inspection are worked by touch under close surface supervision with dive windows cut to the slack either side of the tide. River sediment also settles on horizontal surfaces between cleans, so what the divers find on the flat bottom at Haldia is different in kind from a coastal port — sediment over growth rather than growth alone.
- Where we work
- Dock complex berths · Oil jetties · River anchorage
- Vessels we see here
- Product and chemical tankers · Bulk carriers · Feeder container ships
What we do at Haldia
- Survey programme agreed in advance with the class society and the surveyor attending at Haldia
- Hull plating, welds, sea chests, rudder, propeller and stern gear inspected to the agreed scope
- Live high-definition video to the surface station with two-way diver-to-surveyor communications
- Hull markings and reference points confirmed so the surveyor can locate every feature precisely
- Diving permission and any environmental clearance cleared with Syama Prasad Mookerjee Port, Kolkata
- Full report package with video, stills and findings issued for the class file
Planning the window at Haldia
The north-east monsoon governs the calendar at Haldia Port, roughly October to December. The Bay of Bengal also carries cyclone risk in April to June and again from October to December, so an anchorage attendance on this coast is planned with a standby allowance rather than a single fixed date. River current and sediment govern the method here: dives are cut to the slack either side of the tide, the team works by touch in near-zero visibility, and the vessel has to be properly secured against the stream before anyone enters the water.
Work is taken at the dock complex berths, oil jetties and river anchorage, and which of those a vessel ends up at changes the dive plan more than the season does. Teams mobilise via Kolkata (CCU), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Haldia
Dry bulk handling here puts cargo dust into the water around the berths and anchorage. It settles on horizontal surfaces and packs into sea chest gratings and inlet openings, so inlet and grating clearance is routinely a larger part of the job at Haldia than owners budget for.
River water changes what we find. Freshwater influence shifts the species mix and the growth is often softer but covers more of the hull, and sediment settles over the top of it on horizontal surfaces — two different problems on the same plate.
Standard scope of work
Included as standard on every in-water class survey attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Hull structure inspection
- Shell plating, welds, bilge keels and openings inspected with continuous video and commentary, with cleaning of areas as needed for meaningful viewing.
- Rudder and steering gear
- Rudder plating, pintles, bearings and clearances inspected and, where required, measured.
- Propeller and stern arrangement
- Propeller, boss, rope guard and stern tube seal inspected for damage, erosion and leakage.
- Sea chests and openings
- Sea chests, gratings, valves and overboard discharges inspected and recorded.
- Anodes and coating
- Sacrificial anode wastage assessed and coating condition mapped for planning the next dry docking.
How we deliver it at Haldia
- 1
Scope and vessel details
Tell us the vessel, her particulars, the coating specification and the window at Haldia. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Permits and approvals
Diving permission is obtained from Syama Prasad Mookerjee Port, Kolkata, along with terminal approval where the berth requires it and any environmental clearance for in-water work. This is handled by us, not left with the agent to chase.
- 3
Mobilisation to Haldia
Divers, compressors, brush carts and cameras mobilise via Kolkata (CCU). Where a vessel is also calling at Kolkata, one mobilisation is normally sized to cover both.
- 4
Safety setup and the dive
The vessel is secured for diving — main engine, shaft and thrusters immobilised, sea suctions confirmed shut, permit agreed with the master. Teams work under surface supervision with continuous diver communications and video throughout.
- 5
Report and handover
A completion report covering in-water class survey is issued with before-and-after imagery, coating and anode condition and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Haldia Port at a glance
- UN/LOCODE
- INHAL
- Port type
- Major Port
- State
- West Bengal
- Country
- India
- Water body
- Hooghly River
- Port authority
- Syama Prasad Mookerjee Port, Kolkata
- Main cargoes
- POL and petrochemicals, Coking coal, Containers, Fertiliser, Steel
- Crew mobilisation
- Kolkata (CCU)
- Services here
- Hull Cleaning, Hold Cleaning and Tank Cleaning
Frequently asked — In-Water Survey at Haldia
Do you provide in-water class survey at Haldia Port?
Yes. Cleanship Marine works Haldia Port (INHAL) in West Bengal, India, covering the dock complex berths, oil jetties and river anchorage. Teams mobilise via Kolkata (CCU) with the full spread.
Can in-water class survey be done while the vessel works cargo at Haldia?
Usually yes, but the constraint is the river rather than the cargo plan. Diving is held to the slack either side of the tide, so the real question is whether the vessel's stay covers enough slacks. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Haldia and tell you honestly whether the window you have is enough.
Do you need a diving permit from Syama Prasad Mookerjee Port, Kolkata?
Yes, and we obtain it. Diving permission from Syama Prasad Mookerjee Port, Kolkata, terminal approval where the berth requires it, and any environmental clearance for in-water work are arranged as part of the job rather than left with the agent. The master's permit to work and the immobilisation of machinery are agreed on board before anyone enters the water.
What is underwater visibility like at Haldia?
Visibility at Haldia Port is effectively nil for most of the year, and the north-east monsoon sets the outer limits of the calendar. How the tide and sea state shape the dive plan is set out in full in the working-conditions section on this page.
Which vessels do you carry out in-water class survey on at Haldia?
Product and chemical tankers, Bulk carriers, Feeder container ships — the traffic at Haldia Port runs to pol and petrochemicals, coking coal, containers, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Haldia?
Divers and equipment mobilise via Kolkata (CCU). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Kolkata or Paradip, one mobilisation is often sized to cover both.
What does in-water class survey at Haldia cost?
It depends on the vessel's dimensions and wetted area, the fouling state found, the coating specification and the working window available at Haldia. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Haldia and you get a scoped price, usually the same working day.
In-Water Class Survey at Haldia Port.
Tell us the vessel, her ETA at Haldia and the window. You get a scope, a crew size and an honest duration — usually the same working day.