In-Water Class Survey at Sekondi Fishing Harbour
Class attendance without opening a dry dock
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine delivers class-approved in-water surveys at Sekondi Fishing Harbour, Western Region, with high-definition live video to a surface monitoring station, diver-to-surveyor communications and a full report package for the class file.
Classification societies accept in-water survey in place of drydocking for many vessels and inspection scopes, provided the work is done by an approved diving contractor to a defined procedure with the surveyor able to see the structure in real time. Shelter is on your side here — the vessel is stable and the dive is uninterrupted — but basin silt means the lighting and camera plan has to be agreed with the surveyor before the class attendance is booked, not improvised on the day.
Formal class surveys are uncommon at Sekondi because most of the fleet is outside the class survey regime. What is often needed here is an underwater inspection — damage after a grounding, a check for an insurer or before a sale. Because Takoradi port is next door, a classed vessel that needs a full in-water survey can easily be handled there instead.
What it gets you
- Survey requirement satisfied without opening a dry dock or taking the vessel off hire
- Surveyor sees the structure live rather than reviewing a recording after the fact
- Defects located precisely against hull reference marks, not described approximately
- A report package built for the class file, not a video dump
Working conditions at Sekondi
Sekondi's fishing harbour lies a short distance east of Takoradi port, in the twin city of Sekondi-Takoradi, and it is sheltered behind its own breakwater. It shares a wall with the Sekondi Naval Base, so work near the base boundary follows the navy's security rules. The water is warm and moderately clear away from the landing areas.
- Where we work
- Fishing harbour basin · Fishing boat berths
- Vessels we see here
- Semi-industrial fishing vessels · Inshore fishing boats · Fishing canoes
What we do at Sekondi
- Survey programme agreed in advance with the class society and the surveyor attending at Sekondi
- Hull plating, welds, sea chests, rudder, propeller and stern gear inspected to the agreed scope
- Live high-definition video to the surface station with two-way diver-to-surveyor communications
- Hull markings and reference points confirmed so the surveyor can locate every feature precisely
- Diving permission and any environmental clearance cleared with Ghana Ports and Harbours Authority
- Full report package with video, stills and findings issued for the class file
Planning the window at Sekondi
The combination of Atlantic swell and rain governs the calendar at Sekondi Fishing Harbour, with the heaviest rain from May to October and swell running year-round. The swell here is long-period Atlantic ground swell rather than wind-driven sea, so it reaches the anchorages on days that look calm from the bridge and it is the single biggest cause of a lost in-water window on this coast. Because the harbour is sheltered, work here normally runs alongside or at a protected anchorage and can proceed in parallel with cargo operations rather than competing with them for the berth window.
Work is taken at the fishing harbour basin and fishing boat berths, and which of those a vessel ends up at changes the dive plan more than the season does. Teams mobilise via Takoradi (TKD) or Accra (ACC), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Sekondi
The working fleet here spends most of its life at low speed in warm water, so growth is heavy, mixed and reaches the hard calcareous stage sooner than on deep-sea tonnage. Left too long it starts damaging the coating rather than just slowing the vessel.
The fishing vessels at Sekondi lie alongside between trips in warm, sheltered water, and growth builds quickly on hulls, in sea chests and around the stern gear. Rope and netting around the propeller are a common find.
Standard scope of work
Included as standard on every in-water class survey attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Hull structure inspection
- Shell plating, welds, bilge keels and openings inspected with continuous video and commentary, with cleaning of areas as needed for meaningful viewing.
- Rudder and steering gear
- Rudder plating, pintles, bearings and clearances inspected and, where required, measured.
- Propeller and stern arrangement
- Propeller, boss, rope guard and stern tube seal inspected for damage, erosion and leakage.
- Sea chests and openings
- Sea chests, gratings, valves and overboard discharges inspected and recorded.
- Anodes and coating
- Sacrificial anode wastage assessed and coating condition mapped for planning the next dry docking.
How we deliver it at Sekondi
- 1
Scope and vessel details
Tell us the vessel, her particulars, the coating specification and the window at Sekondi. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Permits and approvals
Ghana Ports and Harbours Authority approves the work alongside the local harbour master, and at a state port that conversation is quicker but less formal — it is worth having in writing. Diving permission, terminal approval and any environmental clearance for in-water work are handled by us, not left with the agent to chase.
- 3
Mobilisation to Sekondi
Divers, compressors, brush carts and cameras mobilise via Takoradi (TKD) or Accra (ACC). Where a vessel is also calling at Takoradi, one mobilisation is normally sized to cover both.
- 4
Safety setup and the dive
The vessel is secured for diving — main engine, shaft and thrusters immobilised, sea suctions confirmed shut, permit agreed with the master. Teams work under surface supervision with continuous diver communications and video throughout.
- 5
Report and handover
A completion report covering in-water class survey is issued with before-and-after imagery, coating and anode condition and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Sekondi Fishing Harbour at a glance
- UN/LOCODE
- GHSEK
- Port type
- State Port
- State
- Western Region
- Country
- Ghana
- Water body
- Gulf of Guinea
- Port authority
- Ghana Ports and Harbours Authority
- Main cargoes
- Fishing catch
- Crew mobilisation
- Takoradi (TKD) / Accra (ACC)
- Services here
- Hull Cleaning
Frequently asked — In-Water Survey at Sekondi
Do you provide in-water class survey at Sekondi Fishing Harbour?
Yes. Cleanship Marine works Sekondi Fishing Harbour (GHSEK) in Western Region, Ghana, covering the fishing harbour basin and fishing boat berths. Teams mobilise via Takoradi (TKD) or Accra (ACC) with the full spread.
Can a fishing vessel get an underwater inspection at Sekondi?
Yes — for damage, an insurer or a sale. We inspect alongside with video and a written report. For a classed vessel needing a formal survey, Takoradi next door is usually better.
Can in-water class survey be done while the vessel works cargo at Sekondi?
Between fishing trips, alongside in the harbour, planned around landings and berth space. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Sekondi and tell you honestly whether the window you have is enough.
Do you need a diving permit from Ghana Ports and Harbours Authority?
Yes, and we obtain it. Diving permission from Ghana Ports and Harbours Authority, terminal approval where the berth requires it, and any environmental clearance for in-water work are arranged as part of the job rather than left with the agent. The master's permit to work and the immobilisation of machinery are agreed on board before anyone enters the water.
What is underwater visibility like at Sekondi?
Visibility at Sekondi Fishing Harbour is moderate — better than the lagoon ports, reduced near the landing areas and after heavy rain, and the combination of Atlantic swell and rain sets the outer limits of the calendar. How the tide and sea state shape the dive plan is set out in full in the working-conditions section on this page.
Which vessels do you carry out in-water class survey on at Sekondi?
Semi-industrial fishing vessels, Inshore fishing boats and Fishing canoes — the traffic at Sekondi Fishing Harbour runs to fishing catch, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Sekondi?
Divers and equipment mobilise via Takoradi (TKD) or Accra (ACC). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Takoradi or Elmina, one mobilisation is often sized to cover both.
What does in-water class survey at Sekondi cost?
It depends on the vessel's dimensions and wetted area, the fouling state found, the coating specification and the working window available at Sekondi. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Sekondi and you get a scoped price, usually the same working day.
In-Water Class Survey at Sekondi Fishing Harbour.
Tell us the vessel, her ETA at Sekondi and the window. You get a scope, a crew size and an honest duration — usually the same working day.