Underwater Hull Cleaning at Yanbu Port
Full hull cleaned in the water, vessel stays on hire
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine provides underwater hull cleaning at Yanbu Port, Al Madinah Province, working the crude loading berths and product jetties. Commercial dive teams remove slime, weed and shell growth from the vertical sides, flat bottom, bilge keels, sea chests and niche areas with the vessel afloat and on hire — no dry dock, no diversion, no off-hire.
King Fahd Industrial Port at Yanbu is Saudi Arabia's Red Sea crude and petrochemical export terminal, loading VLCC crude alongside refined products, LPG and sulphur. Tonnage is large and specialised and the calls are governed end to end by terminal windows.
What it gets you
- Hydrodynamic smoothness restored before fouling reaches the calcareous stage that damages coating
- Fuel and emissions penalty from drag reduced without taking the vessel off hire
- Documented condition record for the technical file and the next docking specification
- Sea chests and inlets cleared, protecting cooling water flow
Working conditions at Yanbu
Yanbu is a refinery and petrochemical export complex with dedicated loading berths, so the constraint is the terminal rather than the weather and the permit chain runs through the Royal Commission as well as the port. Access is controlled and the lead time is real. The Red Sea here is warm, hypersaline and clear enough for usable inspection video — unusual for an industrial port and worth taking advantage of when the berth allows.
- Where we work
- Crude loading berths · Product jetties · Sulphur berth
- Vessels we see here
- VLCC and Suezmax crude tankers · Product and chemical tankers · LPG carriers · Bulk carriers
What we do at Yanbu
- Pre-clean fouling survey to establish coverage, growth type and coating condition before any tool touches the hull
- Brush cart cleaning of the flat bottom and vertical sides, with brush hardness selected against your antifouling specification
- Hand cleaning of bilge keels, rudder, stern frame, thruster tunnels, anodes and the niches a cart cannot follow
- Sea chest gratings and inlet openings cleared of growth and debris to restore cooling water flow
- Diving permission cleared with Mawani and the Royal Commission for Yanbu and the terminal before mobilisation
- Before-and-after video and stills, with a written report on coating condition and anode wastage
Planning the window at Yanbu
The northerly Red Sea wind governs the calendar at Yanbu Port, strongest through the winter and spring. The Red Sea runs a persistent along-axis wind that builds a short chop at the anchorages while the berths stay workable, so the constraint here is almost always the anchorage rather than the season. Because the harbour is sheltered, work here normally runs alongside or at a protected anchorage and can proceed in parallel with cargo operations rather than competing with them for the berth window.
Work is taken at the crude loading berths, product jetties and sulphur berth, and which of those a vessel ends up at changes the dive plan more than the season does. Teams mobilise via Yanbu (YNB) or Jeddah (JED), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Yanbu
Dry bulk handling here puts cargo dust into the water around the berths and anchorage. It settles on horizontal surfaces and packs into sea chest gratings and inlet openings, so inlet and grating clearance is routinely a larger part of the job at Yanbu than owners budget for.
Shelter is a mixed blessing for a hull. The same calm that makes the port easy to work in is still water, and still water grows fouling faster than an exposed berth does.
Standard scope of work
Included as standard on every underwater hull cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Fouling survey
- A pre-clean dive establishes fouling type, coverage and severity, and confirms coating condition so the correct tooling is selected.
- Flat bottom and vertical sides
- Brush cart cleaning of large areas, removing slime, weed and shell growth to restore surface smoothness.
- Niche areas
- Hand cleaning of bilge keels, bow thruster tunnels, rudder, stern frame, anodes and other niche areas where fouling concentrates.
- Sea chests and gratings
- Sea chest gratings and inlet openings cleared of growth and debris to restore cooling water flow.
- Documentation
- Underwater video and stills before and after, with a written report covering coating condition and anode wastage.
How we deliver it at Yanbu
- 1
Scope and vessel details
Tell us the vessel, her particulars, the coating specification and the window at Yanbu. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Permits and approvals
Access at Yanbu Port is the terminal operator's decision as much as Mawani and the Royal Commission for Yanbu's, so both are in the approval chain from the start — a berth-side refusal discovered at the gangway costs the whole attendance. Diving permission, terminal approval and any environmental clearance for in-water work are handled by us, not left with the agent to chase.
- 3
Mobilisation to Yanbu
Divers, compressors, brush carts and cameras mobilise via Yanbu (YNB) or Jeddah (JED). Where a vessel is also calling at Jeddah, one mobilisation is normally sized to cover both.
- 4
Safety setup and the dive
The vessel is secured for diving — main engine, shaft and thrusters immobilised, sea suctions confirmed shut, permit agreed with the master. Teams work under surface supervision with continuous diver communications and video throughout.
- 5
Report and handover
A completion report covering underwater hull cleaning is issued with before-and-after imagery, coating and anode condition and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Yanbu Port at a glance
- UN/LOCODE
- SAYBI
- Port type
- Private Port
- State
- Al Madinah Province
- Country
- Saudi Arabia
- Water body
- Red Sea
- Port authority
- Mawani and the Royal Commission for Yanbu
- Main cargoes
- Crude oil, Refined products, Petrochemicals, LPG, Sulphur
- Crew mobilisation
- Yanbu (YNB) / Jeddah (JED)
- Services here
- Hull Cleaning, Hold Cleaning and Tank Cleaning
Frequently asked — Underwater Hull Cleaning at Yanbu
Do you provide underwater hull cleaning at Yanbu Port?
Yes. Cleanship Marine works Yanbu Port (SAYBI) in Al Madinah Province, Saudi Arabia, covering the crude loading berths, product jetties and sulphur berth. Teams mobilise via Yanbu (YNB) or Jeddah (JED) with the full spread.
Can underwater hull cleaning be done while the vessel works cargo at Yanbu?
Yes, in most cases. The harbour is sheltered enough that divers work alongside while cargo operations continue, and neither holds the other up. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Yanbu and tell you honestly whether the window you have is enough.
Do you need a diving permit from Mawani and the Royal Commission for Yanbu?
Yes, and we obtain it. Diving permission from Mawani and the Royal Commission for Yanbu, terminal approval where the berth requires it, and any environmental clearance for in-water work are arranged as part of the job rather than left with the agent. The master's permit to work and the immobilisation of machinery are agreed on board before anyone enters the water.
What is underwater visibility like at Yanbu?
Visibility at Yanbu Port is moderate, and it drops further around active bulk handling and after heavy rain, and the northerly Red Sea wind sets the outer limits of the calendar. How the tide and sea state shape the dive plan is set out in full in the working-conditions section on this page.
Which vessels do you carry out underwater hull cleaning on at Yanbu?
VLCC and Suezmax crude tankers, Product and chemical tankers, LPG carriers, Bulk carriers — the traffic at Yanbu Port runs to crude oil, refined products and petrochemicals, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Yanbu?
Divers and equipment mobilise via Yanbu (YNB) or Jeddah (JED). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Jeddah or King Abdullah Port, one mobilisation is often sized to cover both.
What does underwater hull cleaning at Yanbu cost?
It depends on the vessel's dimensions and wetted area, the fouling state found, the coating specification and the working window available at Yanbu. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Yanbu and you get a scoped price, usually the same working day.
Underwater Hull Cleaning at Yanbu Port.
Tell us the vessel, her ETA at Yanbu and the window. You get a scope, a crew size and an honest duration — usually the same working day.