UWILD at Port Rashid Port
Survey credit earned without leaving the water
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine runs full UWILD programmes — Underwater Inspection In Lieu of Drydocking — at Port Rashid Port, Dubai, from eligibility discussion through class liaison to the final report package.
UWILD lets a vessel satisfy a survey requirement that would otherwise mean a dry docking, at a fraction of the cost and with none of the off-hire. The requirements are exacting: the contractor must hold class approval, the vessel must be eligible, hull markings must let the surveyor locate features precisely, and the inspection has to be delivered live and documented. Shelter is on your side here — the vessel is stable and the dive is uninterrupted — but basin silt means the lighting and camera plan has to be agreed with the surveyor before the class attendance is booked, not improvised on the day.
What it gets you
- Drydocking deferred and the survey credit earned in the water
- Class liaison handled end to end rather than left with the superintendent
- Eligibility confirmed before cost is committed, not discovered afterwards
- A documented inspection record that stands up to class review
Working conditions at Port Rashid
Port Rashid is a compact, fully enclosed harbour, so work here is sheltered and predictable and can be scheduled against a berth rather than a weather window. Water is warm and still, which is exactly the condition that grows heavy fouling on anything lying idle — harbour craft and laid-up tonnage here foul faster than trading ships do. Basin visibility is moderate.
- Where we work
- Cruise terminal berths · General cargo berths · Ship repair quays
- Vessels we see here
- Cruise ships · General cargo and project vessels · Tugs, workboats and harbour craft · Superyachts
What we do at Port Rashid
- Eligibility review against the vessel's age, type, class notation and survey history before anything is booked
- Programme agreed with the class society and the surveyor attending at Port Rashid
- Hull, rudder, propeller, stern gear, sea chests and appendages inspected to the UWILD scope
- Live video, thickness measurement and clearance readings where the programme calls for them
- Diving permission cleared with DP World and the Dubai Maritime Authority, with the vessel secured and machinery immobilised
- Complete report package submitted for the class file and the drydocking credit
Planning the window at Port Rashid
The shamal governs the calendar at Port Rashid Port, through the winter months and again in early summer. The shamal is a wind and sea-state problem rather than a rain one: it builds short, steep seas across the shallow Gulf that stop anchorage work while berths stay usable. Because the harbour is sheltered, work here normally runs alongside or at a protected anchorage and can proceed in parallel with cargo operations rather than competing with them for the berth window.
Work is taken at the cruise terminal berths, general cargo berths and ship repair quays, and which of those a vessel ends up at changes the dive plan more than the season does. Teams mobilise via Dubai (DXB), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Port Rashid
The working fleet here spends most of its life at low speed in warm water, so growth is heavy, mixed and reaches the hard calcareous stage sooner than on deep-sea tonnage. Left too long it starts damaging the coating rather than just slowing the vessel.
Shelter is a mixed blessing for a hull. The same calm that makes the port easy to work in is still water, and still water grows fouling faster than an exposed berth does.
Standard scope of work
Included as standard on every UWILD attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Eligibility and planning
- Vessel eligibility, survey scope and the society's specific requirements are established and agreed before mobilisation.
- Hull preparation
- Reference markings and cleaning of inspection areas so structure and features can be located and viewed unambiguously.
- Systematic inspection
- Shell plating, welds, rudder, propeller, sea chests, openings, anodes and appendages inspected to the agreed programme.
- Measurement and NDT
- Clearance measurement and underwater NDT carried out where the survey scope requires it.
- Documentation
- Video, stills, measurements and findings compiled into a report package suitable for submission to the classification society.
How we deliver it at Port Rashid
- 1
Scope and vessel details
Tell us the vessel, her particulars, the coating specification and the window at Port Rashid. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Permits and approvals
Diving permission is obtained from DP World and the Dubai Maritime Authority, along with terminal approval where the berth requires it and any environmental clearance for in-water work. This is handled by us, not left with the agent to chase.
- 3
Mobilisation to Port Rashid
Divers, compressors, brush carts and cameras mobilise via Dubai (DXB). Where a vessel is also calling at Jebel Ali, one mobilisation is normally sized to cover both.
- 4
Safety setup and the dive
The vessel is secured for diving — main engine, shaft and thrusters immobilised, sea suctions confirmed shut, permit agreed with the master. Teams work under surface supervision with continuous diver communications and video throughout.
- 5
Report and handover
A completion report covering UWILD is issued with before-and-after imagery, coating and anode condition and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Port Rashid Port at a glance
- UN/LOCODE
- AEDXB
- Port type
- Private Port
- Emirate
- Dubai
- Country
- United Arab Emirates
- Water body
- Arabian Gulf
- Port authority
- DP World and the Dubai Maritime Authority
- Main cargoes
- Cruise and passenger, General cargo, Project cargo, Ship repair
- Crew mobilisation
- Dubai (DXB)
- Services here
- Hull Cleaning and Hold Cleaning
Frequently asked — UWILD Inspection at Port Rashid
Do you provide UWILD at Port Rashid Port?
Yes. Cleanship Marine works Port Rashid Port (AEDXB) in Dubai, United Arab Emirates, covering the cruise terminal berths, general cargo berths and ship repair quays. Teams mobilise via Dubai (DXB) with the full spread.
Can UWILD be done while the vessel works cargo at Port Rashid?
Yes, in most cases. The harbour is sheltered enough that divers work alongside while cargo operations continue, and neither holds the other up. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Port Rashid and tell you honestly whether the window you have is enough.
Do you need a diving permit from DP World and the Dubai Maritime Authority?
Yes, and we obtain it. Diving permission from DP World and the Dubai Maritime Authority, terminal approval where the berth requires it, and any environmental clearance for in-water work are arranged as part of the job rather than left with the agent. The master's permit to work and the immobilisation of machinery are agreed on board before anyone enters the water.
What is underwater visibility like at Port Rashid?
Visibility at Port Rashid Port is moderate, and it drops further around active bulk handling and after heavy rain, and the shamal sets the outer limits of the calendar. How the tide and sea state shape the dive plan is set out in full in the working-conditions section on this page.
Which vessels do you carry out UWILD on at Port Rashid?
Cruise ships, General cargo and project vessels, Tugs, workboats and harbour craft, Superyachts — the traffic at Port Rashid Port runs to cruise and passenger, general cargo, project cargo, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Port Rashid?
Divers and equipment mobilise via Dubai (DXB). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Jebel Ali or Sharjah, one mobilisation is often sized to cover both.
What does UWILD at Port Rashid cost?
It depends on the vessel's dimensions and wetted area, the fouling state found, the coating specification and the working window available at Port Rashid. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Port Rashid and you get a scoped price, usually the same working day.
UWILD at Port Rashid Port.
Tell us the vessel, her ETA at Port Rashid and the window. You get a scope, a crew size and an honest duration — usually the same working day.