Skip to content

By , Founder, Master Mariner · Published · 1 min read

"Converting CPP tanks to wall wash standard: when it's needed and what it takes"

Product tanker cargo tank preparation
Product tanker cargo tank preparation

Most clean petroleum cargoes are accepted against a visual standard: tanks clean, dry, odour-free. Some cargoes and charterers go further and ask for wall wash standard, where samples washed off the tank walls are tested for contaminants. That is a different level of preparation, and it should be planned as such.

When wall wash standard is asked for

  • Some sensitive clean products and petrochemical grades
  • Certain charterer or receiver requirements
  • Moving from a dirty or mixed trade into sensitive cargoes
  • After contamination incidents, as extra assurance

The voyage instructions should state the tests and limits. If they don't, ask before fixing.

What it adds to the clean

Fresh water rinsing. Seawater leaves chlorides; wall wash tests often check for them. A thorough fresh water rinse is usually needed.

Removal of hydrocarbons. Traces of previous cargo that pass a visual check may fail a hydrocarbon test.

Rinsing off cleaning chemicals. Residual chemicals can fail tests. See tank cleaning chemicals.

Drying. Tanks must be dried properly so test results aren't affected by water.

Coating condition. Damaged coatings hold contaminants and can fail tests regardless of cleaning.

Planning time and resources

  • Extra rinse cycles and fresh water supply
  • More drying and ventilation time
  • Pre-testing by ship or contractor before the independent inspector arrives
  • Possibly more manual cleaning in shadow areas (see shadow areas)

Pre-testing

Pre-testing the walls on board before the inspector arrives gives a chance to fix problems early. It doesn't guarantee a pass, but it reduces surprises.

See the DPP to CPP changeover guide and cleanliness expectations by grade.

How Cleanship helps

We prepare tanks to wall wash standard when the cargo requires it, from our bases at Fujairah and in India. See our DPP and CPP tank cleaning service or contact us.

Sources & further reading

Frequently asked questions

What is wall wash standard?

A tank cleanliness standard where samples washed off the tank walls are tested for contaminants such as chlorides and hydrocarbons, beyond a visual inspection.

Why is fresh water rinsing needed for wall wash standard?

Seawater leaves chlorides on tank surfaces, and wall wash tests often check for them.

Do all clean petroleum cargoes need wall wash tests?

No. Many are accepted on a visual standard. Wall wash standard is asked for some sensitive cargoes and by some charterers.

Can tanks be pre-tested before the independent inspector arrives?

Yes. Pre-testing on board helps find and fix problems before the formal inspection.

  • wall wash standard
  • wall wash tank preparation
  • wall wash test product tanker
  • high standard tank cleaning
  • chloride free tanks
Get in touch

Ready when you are.

Tell us the vessel, the port and the window. You get a scope, a crew size and an honest duration — usually the same working day.