Underwater Hull Cleaning at Fujairah Port
Full hull cleaned in the water, vessel stays on hire
Get a quote
Tell us the vessel, the port and the window. Scoped reply, usually the same working day.
Cleanship Marine provides underwater hull cleaning at Fujairah Port, Fujairah, working the Fujairah anchorage and oil terminal berths. Commercial dive teams remove slime, weed and shell growth from the vertical sides, flat bottom, bilge keels, sea chests and niche areas with the vessel afloat and on hire — no dry dock, no diversion, no off-hire.
Fujairah is the world's second-largest bunkering port and the UAE's only major port outside the Strait of Hormuz, working crude and product storage, bunkers, containers and general cargo. The standing anchorage population of tankers waiting for bunkers or orders is the single largest concentration of idle tonnage on the coverage list.
What it gets you
- Hydrodynamic smoothness restored before fouling reaches the calcareous stage that damages coating
- Fuel and emissions penalty from drag reduced without taking the vessel off hire
- Documented condition record for the technical file and the next docking specification
- Sea chests and inlets cleared, protecting cooling water flow
Working conditions at Fujairah
Fujairah is defined by its anchorage. One of the largest bunkering anchorages in the world sits off the port, and vessels lie there for days at a time — which is both why so much in-water work happens here and why so much of it is needed. Gulf of Oman water is deeper and clearer than inside the Gulf, so survey video is genuinely usable, but the anchorage is exposed to Arabian Sea swell and the June and October-November cyclone windows govern the working calendar.
- Where we work
- Fujairah anchorage · Oil terminal berths · Container and general cargo berths
- Vessels we see here
- Crude and product tankers, VLCC to coastal · Bunker barges and tankers · Container ships · Offshore support vessels
What we do at Fujairah
- Pre-clean fouling survey to establish coverage, growth type and coating condition before any tool touches the hull
- Brush cart cleaning of the flat bottom and vertical sides, with brush hardness selected against your antifouling specification
- Hand cleaning of bilge keels, rudder, stern frame, thruster tunnels, anodes and the niches a cart cannot follow
- Sea chest gratings and inlet openings cleared of growth and debris to restore cooling water flow
- Diving permission cleared with Port of Fujairah Authority and the terminal before mobilisation
- Before-and-after video and stills, with a written report on coating condition and anode wastage
Planning the window at Fujairah
The Arabian Sea swell governs the calendar at Fujairah Port, with the sharpest risk around June and again in October and November. This coast sits outside the Strait of Hormuz and takes Indian Ocean weather directly, so the anchorage is the exposed part of the operation while alongside work carries on. Work here is done with the vessel riding to her anchor, so the dive plan is built around sea state and swell rather than a berth slot, and the team stands by for a workable window rather than a scheduled one.
Work is taken at the Fujairah anchorage, oil terminal berths, container and general cargo berths, and which of those a vessel ends up at changes the dive plan more than the season does. Teams mobilise via Fujairah (FJR) or Dubai (DXB), so give us the ETA as early as you have it — the travel is the flexible part, the approvals and the working window are not.
What we typically find at Fujairah
Dry bulk handling here puts cargo dust into the water around the berths and anchorage. It settles on horizontal surfaces and packs into sea chest gratings and inlet openings, so inlet and grating clearance is routinely a larger part of the job at Fujairah than owners budget for.
Vessels here sit at anchor for long periods, and a stationary hull in warm water is the ideal fouling substrate. The heaviest growth we lift at this port is almost always off a vessel that has been waiting rather than working.
Standard scope of work
Included as standard on every underwater hull cleaning attendance, wherever the vessel is. Anything outside it is quoted separately and flagged before mobilisation, never added afterwards.
- Fouling survey
- A pre-clean dive establishes fouling type, coverage and severity, and confirms coating condition so the correct tooling is selected.
- Flat bottom and vertical sides
- Brush cart cleaning of large areas, removing slime, weed and shell growth to restore surface smoothness.
- Niche areas
- Hand cleaning of bilge keels, bow thruster tunnels, rudder, stern frame, anodes and other niche areas where fouling concentrates.
- Sea chests and gratings
- Sea chest gratings and inlet openings cleared of growth and debris to restore cooling water flow.
- Documentation
- Underwater video and stills before and after, with a written report covering coating condition and anode wastage.
How we deliver it at Fujairah
- 1
Scope and vessel details
Tell us the vessel, her particulars, the coating specification and the window at Fujairah. We come back with a defined scope, a crew size and a duration we will stand behind. Where the conditions here will not support what has been asked for, we say so at this stage rather than after mobilisation.
- 2
Permits and approvals
Diving permission is obtained from Port of Fujairah Authority, along with terminal approval where the berth requires it and any environmental clearance for in-water work. This is handled by us, not left with the agent to chase.
- 3
Mobilisation to Fujairah
Divers, compressors, brush carts and cameras mobilise via Fujairah (FJR) or Dubai (DXB). Where a vessel is also calling at Khor Fakkan, one mobilisation is normally sized to cover both.
- 4
Safety setup and the dive
The vessel is secured for diving — main engine, shaft and thrusters immobilised, sea suctions confirmed shut, permit agreed with the master. Teams work under surface supervision with continuous diver communications and video throughout.
- 5
Report and handover
A completion report covering underwater hull cleaning is issued with before-and-after imagery, coating and anode condition and anything found that you should know about. The findings are discussed with the vessel rather than emailed and forgotten.
Fujairah Port at a glance
- UN/LOCODE
- AEFJR
- Port type
- State Port
- Emirate
- Fujairah
- Country
- United Arab Emirates
- Water body
- Gulf of Oman
- Port authority
- Port of Fujairah Authority
- Main cargoes
- Bunkers, Crude and refined products, Containers, General cargo, Aggregates
- Crew mobilisation
- Fujairah (FJR) / Dubai (DXB)
- Services here
- Hull Cleaning, Hold Cleaning and Tank Cleaning
Frequently asked — Underwater Hull Cleaning at Fujairah
Do you provide underwater hull cleaning at Fujairah Port?
Yes. Cleanship Marine works Fujairah Port (AEFJR) in Fujairah, United Arab Emirates, covering the Fujairah anchorage, oil terminal berths, container and general cargo berths. Teams mobilise via Fujairah (FJR) or Dubai (DXB) with the full spread.
Can underwater hull cleaning be done while the vessel works cargo at Fujairah?
Yes — it is the norm here, because the work is done at anchor rather than at a berth. Barge operations carry on around the dive, with the working side agreed with the master beforehand. The vessel stays on hire throughout, and there is no diversion and no dry dock. We scope against the conditions at Fujairah and tell you honestly whether the window you have is enough.
Do you need a diving permit from Port of Fujairah Authority?
Yes, and we obtain it. Diving permission from Port of Fujairah Authority, terminal approval where the berth requires it, and any environmental clearance for in-water work are arranged as part of the job rather than left with the agent. The master's permit to work and the immobilisation of machinery are agreed on board before anyone enters the water.
What is underwater visibility like at Fujairah?
Visibility at Fujairah Port is generally workable outside the monsoon, though cargo dust from lighterage reduces it sharply near an active transfer, and the Arabian Sea swell sets the outer limits of the calendar. How the tide and sea state shape the dive plan is set out in full in the working-conditions section on this page.
Which vessels do you carry out underwater hull cleaning on at Fujairah?
Crude and product tankers, VLCC to coastal, Bunker barges and tankers, Container ships, Offshore support vessels — the traffic at Fujairah Port runs to bunkers, crude and refined products, containers, so those are the profiles we see most. The scope is sized to the vessel, not to a standard package.
How quickly can a team mobilise to Fujairah?
Divers and equipment mobilise via Fujairah (FJR) or Dubai (DXB). Give us the ETA and the window and we will confirm what is achievable rather than promise a date we cannot hold. Where the vessel also calls at Khor Fakkan or Mina Saqr, one mobilisation is often sized to cover both.
What does underwater hull cleaning at Fujairah cost?
It depends on the vessel's dimensions and wetted area, the fouling state found, the coating specification and the working window available at Fujairah. We would rather scope it properly and give you a specific figure than quote a headline rate that changes once the work starts. Send the details and the window at Fujairah and you get a scoped price, usually the same working day.
Underwater Hull Cleaning at Fujairah Port.
Tell us the vessel, her ETA at Fujairah and the window. You get a scope, a crew size and an honest duration — usually the same working day.